Applications Information On this page, we have included some tips and suggestions about the set-up and use of BIT products. AIM System AIM-BPSW: Blood Pressure Synchronization Sensor & Switch Setup This page has information describing the installation and operation of the AIM-BPSW. Batteries Recommended for use in the AIM-8 Based on customer demand, BIT performed a series of tests on commercial, 9V alkaline batteries to determine which battery worked best (i.e., had the longest life) in the AIM-8. If you follow the link, you will find the test results and discover why we recommend the Rayovac Maximum and Energizer Titanium for use in the AIM-8. Placement of Electrodes A diagram illustrating the recommended placement of AIM-8-V3 electrodes on a subject. Calibrating the AIM A short guide to the AIM Monitor calibration process. COP System COP-BPSW: Blood Pressure Synchronization Sensor & Switch Setup This page has a diagram showing how to setup the COP-BPSW with a Blood Pressure Control Unit and the COP system. HIC System HIC-2000 Tips & Suggestions comming soon. MicroTronics HomePage